Add: Room 1202, Jincheng Building, Shangyu City, Zhejiang Province, China
Plasticizer Or Carrier SD-10
Carrier SD-10 Advantages:
1. Carrier SD-10 can be added directly to the open dye vat .It will take 30 to 60 minutes ( a little longer for the dark) with clean absorption.
2. Carrier SD-10 is better than the non environment protection carrier with good recurrence.
3. The wool will not be staining.
Advantages: 1. Carrier SD-10 can be added directly to the open dye vat .It will take 30 to 60 minutes ( a little longer for the dark) with clean absorption. 2. Carrier SD-10 is better than the non environment protection carrier with good recurrence. 3. The wool will not be staining.
Usage: 1. Carrier SD-10 is specially developed for dyeing under Low-Temperature conditions, it an be used for dyeing at the boiling point (98- 100℃) . Reference ratio: 1-3%( light, middle color) 5%(dark color, it is the ideal amount) 2. Carrier SD is the “leveling agent-carrier”. Therefore this carrier is especially suitable for dyeing textured polyester articles with barred problems. Reference ratio: 0.2-0.5g/l(dyeing); 1-3g/l(modifying) 3. For the one-bath dyeing of wool/polyester、cotton/polyester, polyester/nylon -blends with disperse and cationic dyes, carrier SD can be used. too
Points of attention: 1. Please stir fully before using to avoid the white precipitation after long settlement. 2. No odor after washing and drying for the weaves.
Packing and storage: 100kg P.E./drum, seal airtight.
RFQ:
Q1:Can you supply samples? Yes, Simo can supply you samples for free charge.
Q2:What’s your payment term?
Usually L/C, T/T, D/P, D/A, it is determined by our negotiation.
Q3:Can you customize product?
Yes, Simo can supply you products according to your requirement.
Q4:Which country are your customers mainly distributed in?
Russia, America, UAE, Saudi Arab and so on.
Q5:Industry research and development
Every year, the company hires famous domestic and foreign experts of petroleum industry to guide and teach the factory. And new environmental cementing and drilling additives are being developed and upgraded by our R&D team.
