Name: Non Type Wool Low Temperature Accelerating Levelling Agent
Brand: Simo
SKU: 56377277

Non Type Wool Low Temperature Accelerating Levelling Agent

Wool low temperature accelerating levelling agent SY-7 Performance: 1. SY-7 will decrease the dying temperature for acid dyes, usually the dyeing temperature will decrease from 95-100℃ to 65℃ if other traditional craft keep unchangeable. 2. The dyeing time can be controlled by adjusting the formic acid, the dying is uniform with clean absorption.

Wool low temperature accelerating levelling agent SY-7

Characteristic:
Appearance: Slightly yellow or colorless liquid
Ionic: Non
PH: 6-8
Active ingredients content: 50%

Usage:
Dying for wool or cashmere、wool yarn、further etc. animal hair.

Performance:
1. SY-7 will decrease the dying temperature for acid dyes, usually the dyeing temperature will decrease from 95-100℃ to 65℃ if other traditional craft keep unchangeable.
2. The dyeing time can be controlled by adjusting the formic acid, the dying is uniform with clean absorption.

Reference craft:
Add water and fabric→Add 1-2g/l SY-7( For the dark one, the ratio can be increased to shorten the dyeing time) →Run 10-20 minutes→Add formic acid 0.1-2% to fabric weight( the content of formic acid is 85-88%, many times after dilution) →Add acid dyes→Increase the temperature slowly to 65℃→Heat preservation till clean absorption( usually it is 45-90 minutes) →(Mordant) →Clean.

Packing and storage:
125kg/drum, seal airtight.

RFQ:

Q1:Can you supply samples?
Yes, Simo can supply you samples for free charge.

Q2:What’s your payment term?

Usually L/C, T/T, D/P, D/A, it is determined by our negotiation.

Q3:Can you customize product?

Yes, Simo can supply you products according to your requirement.

Q4:Which country are your customers mainly distributed in?

Russia, America, UAE, Saudi Arab and so on.

Q5:Industry research and development

Every year, the company hires famous domestic and foreign experts of petroleum industry to guide and teach the factory. And new environmental cementing and drilling additives are being developed and upgraded by our R&D team.

Workshop Show