Carrier SD-10

Plasticizer( HS:2917341090)

Traits:

Appearance: milky white thick liquid

Content: 30%

Solubility: can be dispersed in water

PH value: 6-7

Smell: no unpleasant smell

Alkylphenol polyether: not included

Features:

1. It can be dyed in open dyeing tank, finished in 30-60 minutes (slightly darker color), and the color is clean.

2. It has higher color yield than non-environmental dyeing carrier, and the dyeing reproducibility is good.

3, the wool does not stain.

use:

1. For low-temperature dyeing of polyester: it is a good dyeing agent for dyeing and printing polyester fiber or wool/polyester, cotton/polyester, polyester/bromine blended fabric, etc. The reference dosage is (for cloth weight): light, medium color: 1 -3%, dark color: 5% (this ratio is the ideal effective use amount), the dosage is determined according to the required sample, and the dyeing temperature is 95-100 °C.

2, for polyester high-temperature dyeing auxiliaries: dyeing and coloring of difficult-to-dye fibers such as polyester microfibers and cheese yarns. Dyeing: 0.2-0.5 g/l, repair: 1-3 g/l.

Use attention!

1. If the product is left for a long time, it may produce white precipitate. Please stir it well before use.

2. After dyeing, the fabric is washed with detergent and dried without residual odor.

Packaging and storage:

100KG/plastic drum, sealed and stored.

Carrier2