Viscosity reducer for crude oil SM-JN-30(water)

This product is compounded by a variety of surfactants. The main component is anionic, nonionic surfactants; It can solve the problem of solidification with the decrease of temperature in the process of heavy oil uplift. The product formulation is reasonable and has special viscosity reducing effect on heavy oil with high content of colloid and asphaltene; It can make the viscosity of 200 00-30000cps heavy oil increased to 30-50 ℃ with excellent fluidity, it has no effect on demulsification and refining of heavy oil, and has excellent properties such as salt resistance, high temperature resistance, etc. Pls see the below vide as below:

1. Product indicators:

Appearance : transparent liquid

Density g / cm ~ 3 / m ~ 3: 0.9-1.05

Effective content: ≥30%

PH value: 6-9

2. Application :

Preparing solution when use it and add it to crude oil according to the measurement. When the freezing point of crude oil is high, the dosage of reagent can be increased appropriately. When the steam huff and puff is pretreating in the heavy oil block, the hot water in combined station can be used in a certain proportion according to a certain proportion. During the using process , inject the prepared solution into the well through the well bore space when the well temperature is 100 - 110℃ , the mixture of medicament and heavy oil can be fully mixed through the action of pump and the purpose of viscosity reduction and exploitation can be achieved. Use purpose, ratio and concentration can be determined according to the actual situation of water content in oil wells.

3. Packing, storage:

This product is packed in plastic barrel, 200kg. Stored in cool, dry, ventilated place, avoid severe collision during transportation to prevent breakage, valid time is one year.