Name: High Performance Anti-blocking Agent
Brand: Simo
SKU: 77904076

Nature：

Appearance: white solid (colorless liquid or light yellow liquid solution)

CIO2%: ≥2

PH（solution）: ＞8.0

Density（solution）（20℃）g/cm3: 1.03~1.08

Feature：

1. Use surfactant displacing agent remove plugging.

2. Lift the reservoir gap clogging, provide a prerequisite for the increase.

3. Compatibility is good, practical.

4. Solid chlorine dioxide + environmentally friendly solid activator technology to solve the acid activation leads to secondary plug the wells, equipment corrosion and environmental pollution.

5. Pumped into underground process is simple, safe and reliable, easy to operate.

Product introduction：

Well Plugging problems are endemic, and well plugging caused damage to the oil and gas reservoirs for a variety of oil field operations, and our company after the experiments and research to develop a the oilfield composite plugging agent.

Mechanism of action:

1.Using Strong oxidizing bactericidal properties of chlorine dioxide and activator synergy, eliminate the polyacrylamide (HPAM) gel particles, sulfate-reducing bacteria (SRB), saprophytic bacteria (TGB), and iron bacteria (IB) and sulfide bacteria which caused the blockages of polymer injection wells, injection wells near the hole formation.

2.After Chlorine dioxide into the ground, it can quickly oxidate and degradate all kinds of organic polymer which are residues near wellbore in the construction measures of drilling, fracturing, water control and others. Its viscosity greatly reduced liquidity better, discharge from the formation. React with Sulfide ferrous dirt, generate soluble iron salts.

3.Chlorine dioxide and ferrous sulfide scale react with each other to generate the soluble iron salts, to prevent the secondary precipitation of ferrous sulfide, and clear in recent ability to penetrate the formation, thus Injection pressure by the same time to eliminate the harmful gases produced by the acidification stage sulfur dioxide, which can reduce the residual acid corrosion of steel. Kill fungi, decomposed sulfide.

Usage and dosage:

1. Through the casing to make the preflush 5~ 10T injected underground

2. Main agent and adjuvant ground activation, the generation of the working fluid into the formation through the casing once and for all

3. Through the sleeve to make the rear fluid 5 ~10T injected underground (activated after plugging removal agent squeezed into the perforations)

4. Shut-in 4 ~ 12 hours then resume production

5. Dring the using process , wear with good overalls, safety glasses, gloves and masks, pay attention to the protection of labor safety

Packaging Transportation and Storage:

Special bags (25kg / bag). Transport process should avoid the rain, damp, damaged; Use process strong corrosive, prevent burns; Prohibited mixing placement and transport of the main and auxiliary reagent ; Pay attention to never store and transparent with acid matter. The product should be stored in clean, dry and ventilated place.

Q1:Can i get free samples?

We can provide you a certain amount of free samples,please contact us directly.

Q2:How can i get the price ?
Please give us the exact quantity,packing,destination port and other necessary information,we will give you quotation according to your specific requirements.

Q3:I am not sure whether your product is appropriate in my case,what should i do?

The best way is according to your usage,we suggest you some samples,if you check is ok ,we will quote a price for you, if you are satisfactory after the confirmation ,you can place an order.

Q4:I am a small wholesaler ,do you accept a small order ?

It is no problem if you are a small wholesaler,we would like to grow up with you together.

Q5:How to use ?

We have the product details,if not very clear,pls contact us.

Q6:How to become your agent in our area?

When we do business with adequate large orders and establish a trusting relationship,we can discuss to set up a foreign agent.

Q7: Tell me your MOQ ?

We can accept 500kg of the MOQ.

Q8:What is your production capacity ?

100000MT each year.

Q9:How can you ensure the quality of your product ?

1.Quality is the foundation of our company,we have been engaging in this field since 1999,with the certification of ISO9001,work safety standardization,intertek quality ensurance is the reason why we can thrive in the competition and establish long term cooperation with many foreign customers and domestic customers.

2. We promise that bulk production is same quality as the sample ,and you can request a third party company ,such as SGS , to inspect and test the bulk cargo before shipment. ( you should bear the inspection expense )

Anti-blocking agent