Name: Excellent Wetting & Emulsification Property De-inking Agent
Brand: Simo
SKU: 55617864

Excellent Wetting & Emulsification Property De-inking Agent

De-inking agent SM-TM-45 Technological process： 1,Hydraulicpulper deinking method (1) Preparing deinking agent 0.5%,sodium silicate (silicate of soda) 3%,sodium hydroxide 3%, then put these chemical into hydraulicpulper and add warm water(water temperature 800-1000) .Start hydraulic pulper about 3 minutes, then put the wastepaper into it. (2) In order to reach the best effect, pulp concentration required 14%-16%(put 140KG-160KG wastepaper into pulper of a ton volume) ,starting the pulper about 25-35minutes, then stop the pulper and keeping temperature about 10-20 minutes. (3) Concentration and washing should be done immediately after blowing in order to prevent ink redeposited on the fibers.(It will get a good effect if put a spot of deinking agent when water washing)

De-inking agent SM-TM-45

Sample name	De-inking agent SM-TM-45
Test project	Standard	Result
Appearance	light yellowish brown thick liquid	no visible impurity
Content%	45±2	45.5
Water%	55±2	54.5
penetrability1%	≤15S	meet
PH value（1% water solution）	6-9	6-9

Feature：

1. Resisted for strong alkali，anti-oxidant；

2. Excellent wetting & emulsification property；

3.The dosage is less 50% then normal de-inking agent.

Technological process：

1,Hydraulicpulper deinking method
(1) Preparing deinking agent 0.5%,sodium silicate (silicate of soda) 3%,sodium hydroxide 3%, then put these chemical into hydraulicpulper and add warm water(water temperature 800-1000) .Start hydraulic pulper about 3 minutes, then put the wastepaper into it.
(2) In order to reach the best effect, pulp concentration required 14%-16%(put 140KG-160KG wastepaper into pulper of a ton volume) ,starting the pulper about 25-35minutes, then stop the pulper and keeping temperature about 10-20 minutes.
(3) Concentration and washing should be done immediately after blowing in order to prevent ink redeposited on the fibers.(It will get a good effect if put a spot of deinking agent when water washing)

2,The steam-ball deinking method
(1) Put the following chemicals into the ball in the proportion of 6 KG of paper deinking agent, 20 KG of sodium hydroxide, and 30 KG of sodium silicate. After it is evenly mixed, and then input the water and waste paper at a solid content of 30% to 50%.
(2) Open steam and make the temperatures to reach 800-1000 and keep 30-40 minutes, then blowing out when the pressure reaches a peak.
(3) After blowing out, pulping first then washing . The original deinking wastewater can be reused after precipitation and impurity removal.

RFQ:

Q1:Can you supply samples?
Yes, Simo can supply you samples for free charge.

Q2:What’s your payment term?

Usually L/C, T/T, D/P, D/A, it is determined by our negotiation.

Q3:Can you customize product?

Yes, Simo can supply you products according to your requirement.

Q4:Which country are your customers mainly distributed in?

Russia, America, UAE, Saudi Arab and so on.

Q5:Industry research and development

Every year, the company hires famous domestic and foreign experts of petroleum industry to guide and teach the factory. And new environmental cementing and drilling additives are being developed and upgraded by our R&D team.

Workshop Show