Anti-blocking agent SJ-1

product description

The problem of oil well plugging is widespread. For the well blockage caused by the damage of oil and gas reservoirs in various oilfield operations, our company has developed an oilfield compound plugging agent through experiments and research.

main feature

·Composite disintegration with surface active oil displacing agent

·Remove the blockage of oil layer gaps and provide preconditions for increasing production

·Good compatibility and practicality

Method of use and dosage

·Inject the pre-fluid 5~10T into the well through the casing

· After the main agent and auxiliary agent are activated on the ground, the working fluid is generated and injected into the formation through the sleeve at one time.

·Inject the post-fluid 5~10T into the well through the casing (squeeze the plugging agent into the incident hole section after activation)

·Restore production after 4-12 hours of shut-in

·When wearing, take good work clothes, protective glasses, gloves and masks, pay attention to labor safety protection

Packaging, transportation and storage

·Special bag (25kg/bag)

· Avoid rain, moisture and damage during transportation

· Strong corrosive during use to prevent burns

·Do not mix and store main and auxiliary reagents, be careful not to store and transport with acidic substances.

·The product should be stored in a clean, dry and ventilated place

Anti-blocking2