Half light transparent lacquer can be directly sprayed on the surface of the model, it can serve as a protective lacquer to protect water, of course instead of delustrant spray on the model of semifinished, just after the spray model is half gloss surface, if you do a tank vehicle model, semifinished have some false, suggest you still use extinction protection paint. In addition, flatting agent dilution directly spray it is wrong, tamiya water-based X21 matting agent on the bottle has a FLAT BASE in English means the matting agent should be added in other paint to modulation extinction protection paint, also want to buy X - 22, tamiya transparent paint in the X - 22 light oil, flatting agent is 10% - 20% is half gloss paint; Add 20%-30% to eliminate varnish, according to your need to add, can not get white fog to eliminate varnish.
If you are too lazy to modulation, directly buy spray cans of flatting agent is ok, but the price is expensive bottles, spray cans of delustrant transparent paint and flatting agent mix well, not a white mist.
I'll show you how to deal with the white fog:
Don't panic. Don't do anything.
You can try using X20A solvent with a small amount of light oil (transparent paint). The use of other delusions, such as county's, is similar. The principle is that when it dries, the surface is rough and diffused, so it's not bright, and the mirror becomes sandpaper. Like marble, the embryo is white, polished and not white as a mirror. Once the rough surface of the fog is filled with liquid, it will not be white. At this time, with a good light oil spray, solvent volatile oil dry, filled part of the rough surface, diffuse reflection effect is weakened, fog disappeared. Of course, you should pay attention to the amount of light oil. Back and forth your model becomes steamed stuffed bun, see a blob of oil, the middle of a small model meat filling.