CAS NO. 28519-02-0 This product has a disulfonate hydrophilic structure anionic surfactant. In addition to the characteristics of conventional anionic surfactants, it has excellent water solubility, surface activity, superior detergency, dispersibility and hard water resistance. It has good...
This product has the structure of double hydrophilic sulfonate anion surface active agent, besides has the characteristics of conventional anionic surfactants, excellent water solubility, surface activity, superior decontamination performance, dispersing ability and hard water resistance and high concentrations in strong acid, strong alkali, inorganic salt and bleach solution has good solubility and stability.It is becoming a good substitute for K-12, OP-10, TX-10.
Advantages：
1. Each molecule contains two negative charges, with a larger dispersion force, higher solubility in electrolyte solution, and higher stability to strong acid, strong base and salt solution.
2. High molecular weight, strong adsorption capacity, high efficiency and low cost when preparing emulsion;Latex particle size distribution is narrow and uniform.
3. With strong thermal stability, it is still suitable for emulsification polymerization at 80-120℃ without loss of surface activity.
4. Good mechanical stability. The emulsion emulsified by this product shows extraordinary stability even under higher shear conditions.
5. High oxidation stability. At room temperature, it only changes under the action of strong oxidant: at 50℃, the strongest oxidant will take effect several hours later.
6. Low toxicity, contact with skin or eyes at 1% concentration will only produce temporary pain and irritation;But at higher concentrations (>10%), avoid contact with eyes or skin.
Purpose：
1. Emulsion polymerization
Styrene-butadiene rubber latex, ABS resin, acrylic resin, PVC, vinyl chloride, butyl benzoate, all above choose this product as emulsifier, enable the latex with small particle size, distribution, storage stability, gel, etc… and can use the dosage of the product to control emulsion particle size and surfactant.
2. Textile printing and dyeing, dyes, chemicals industry
1）Can be used as a homogenizing agent in acid dyeing of the nylon, acting as dyeing material carrier to control the transfer of the acid coloring matters, and make dye uniform distribution. The result is Reducing chromatism, dye material consumptions down, economic performance improved.
2）Often used as an additive compound component.
3）Commercialization additives of dye, Greatly enhance the dye dispersion, solubility index.
3. As a cleaning agent components
Also used as cleaning agent, wetting agent, coupling agent and stabilizing agent. It have synergistic effects with other non-ionic and anionic surfactants, can used as Low temperature soap, in general detergent, it also can dissolved and stable the Phenol in detergent formulations and the fungicides which conclude chlorophenol.
4. Oil industry
The High temperature stability and resistance to electrolytes of this product make it be used for Oleic acid emulsion in the third stage of the process of tertiary oil recovery. It used as emulsifier to isolate the acid sludge.
5. Phenolic resin industry
Used as binder and Link agent in water-solubility phenolic resin.
This resin is sensitive to temperature, and short shelf life, unless there is a refrigerated or frozen. If takes from small solution and to be used, there will has a good add water dilute force in resin application. Alkaline aqueous solution or alcohol solution used in traditional manufacturing as resin solvent, but to high molecular weight resin, the more alcohol or PH value are needed in order to maintain the stability of the resin in solution. This product can overcome these difficulties. It can dissolve high molecular weight resin, used in a wide PH range, strong dilution, long life, its advantages are follows: Reduce jet (frost) and curing. Add this product to do the accelerator; high molecular weight resin will reduce the volatilization loss. This product has no flash point and fire point, add the product can reduce the danger of fire. This product is excellent resin solvent, add 0.15% of this product can increase the water-soluble of high molecular weight resin, and increase ten-fold diluting capacity. In diluted solution, the resin containing the goods can be stored at room temperature for a month. Use this product to dissolve the resin can make full use of raw materials
, thereby reducing costs. Add this product can accelerate the cure speed of the high molecular weight resin.
6. Paint industry: used as the anionic leveling agent.
7. Pesticide industry: used as synergist, and spreading agent, wetting agent, penetrating agent and flowable in Pesticide emulsion.
8. Architectural industry: used as asphalt stabilizer which improve the road quality.
9. Production of thin films: used as antistatic agent in High polymer films
10. Electroplating industry: additive, Can control the shape and size of the grains.
11. Rubber industry: used as antistatic agent
12. Environmental protection: widely used in soil decontamination, subsurface repair and other geological aspects.
Packaging and storage: 125,240KG/ barrel. It can be packaged according to the request. The product is stability, Non-flammable, Non-explosive; It should be sealed airtight after using to prevent debris intrusion; Can adapt to the general ambient temperature (5~35%), avoid sun exposure, quality guarantee period is more than one year. To avoid the freeze happens. If frozen, it should be heated above 10℃, when liquefaction, using it after stirring.
